featured in Mom magazine

the-celebration-shoppe-in-mom-magazine

The 2Q 2010 issue of Mom magazine showcases our bugs & butterflies birthday party collection. Mom editors used our collection to style a “real” planting birthday party they hosted using the Mini-farm Box growing kit. {Excited giggle!}

the-celebration-shoppe-in-mom-magazine2

Here’s page 2 of the article and more about the Mini-farm Box.

the-celebration-shoppe-in-mom-magazine3

And on page 3 you can see our bug cupcake picks and cupcake wrappers, along with our polka dot cake plate and table runner. These items and more of the bugs & butterflies collection can be found in our shoppe. Oh, and if you can’t read the 4 pt. font in these screenshots, you can check out the complete article on our press & praise page.

Happy Monday everyone!

you may also like:

buggy wings

bug_ladybugwingsIn addition to the buggy headbands, we’re also going to demonstrate today on Daytime Columbus how to make these super easy ladybug clip on wings for your next bugs and butterflies birthday bash. I know, you’re thinking “she says everything is easy.” Well these really are. Here’s what you need:

  • ½ yard netting or bridal tulle
  • 16 gauge crafting wire (found in the jewelry section of your craft store)
  • ¾ inch ribbon, grosgrain shown
  • Wooden bug cutout (available, usually painted, in craft stores)
  • Mini clothespin
  • Glue gun (fabric glue can be used for the ribbon portions)
  • Wire cutters

And here’s how you make them:

  1. Bend the crafting wire into the shape of your wings, considering the size of the child, cut it with wire cutters and twist the ends around one another.
  2. Using the wing shape as a loose guide, cut out four pieces of netting, leaving a ¼ inch to ½ inch all the way around. Each wing will be two pieces thick.
  3. Tack the netting to the wire frames with just a touch of glue and trim off excess.
  4. Apply the ribbon to the outer rim of your wings to secure the netting and to hide the wire. The best way is to center the wire in the ribbon, pipe in a stream of glue (not too much) and then lightly tap it down with your fingers until you’ve gone all the way around each wing.
  5. Next, hot glue a mini clothespin to the back of your wooden bug cutout, near the bottom of the bug.
  6. Finally hot glue the wings to the back of the cutout, allow to cool and the wings are ready for play.

If you prefer a visual guide, the “how to” video will be posted on our blog by Friday. Happy crafting!

you may also like:

buggy headbands

bugheadbands2This morning we’re going to be showing Gail Hogan of NBC’s Daytime Columbus how to make these soooo cute, if I do say so myself, ladybug and dragonfly headbands. These are wonderful for bugs and butterflies party favors or just for pretend play.

Here’s what you’ll need:

  • ¾ inch (at least) headband
  • ¾ inch ribbon, grosgrain is shown
  • pipe cleaner (one for straight antenna and two for curly)
  • pom poms
  • glue gun

And here’s how you make these super easy buggy headbands:

  1. Bend your pipe cleaner in the center and then again about a half inch on both sides so that you have a inch to inch-and-a-half base. Apply the base of your pipe cleaner to the middle of the headband with a strip of hot glue. (TIP: If you want curly antenna, use two pipe cleaners. Curl one end around your finger and bend the ends about ¾ inch to apply to the headband.)
  2. Bend the tips of your pipe cleaner outward about a ¼ inch and hot glue on your pom poms.
  3. Clip two one inch sections of ribbon to cover the ends of your headband. Apply each piece with a dot of glue on both sides.
  4. Apply a dot of glue on the inside of the headband, on top of the ribbon you just placed to cover the ends, and wrap your ribbon around in a straight line to cover any exposed headband. Continue to wrap your headband angling your ribbon with each turn and gluing as you go.
  5. When you reach the pipe cleaner, get your ribbon as close to it as possible and then overlap it on the opposite side being careful not to leave exposed headband.
  6. Keep going until you’ve covered the entire headband and end your ribbon on the inside.

If you prefer to see how this is done, we’ll post the “how to” video here on our blog by Friday.

you may also like: